Compressed air for removing aquatic products: AH
Working pressure: 0.6~1.58MpaG
Inlet air temperature: 40℃
Ambient temperature: <40℃
Cycle period: 10 hours
Regeneration gas volume: about 7%
Pressure dewpoint: -20~ -70℃
Filler: activated alumina / molecular sieve
Color available: Starry Sea Blue / Tranquil Grey
Power supply: 380V / 3P / 50 (60) Hz
Product introduction
AH series is to remove the water in the compressed air through the principle of variable temperature change and adsorption.
The structure of two towers, one tower under the condition of low temperature and high pressure, through the "Van der Waals' force" between the adsorbent and water molecules to make the water molecules adsorbent on the adsorbent to achieve the purpose of drying; The other tower is under the condition of low pressure and high temperature, let the adsorbent reverse desorption, low pressure and high temperature conditions by the adsorption dryer outlet dry gas after decompression into the heater heating to achieve low pressure and high temperature dry gas into the adsorption tower to promote the adsorption of water and water away, finally through the muffler empty, in order to achieve the regeneration of adsorbent. The two towers run alternately to provide the user with dry compressed air.
1.Large-capacity adsorbent filling extends the life of the equipment
2.Sufficient filling adsorbent, equipment stability is higher
4.Reasonable system configuration has lower energy consumption
5.Equipped with ceramic balls to ensure the effect and life of adsorbent
7.Smart touch screen control
Product types choosing